Fence Board Planked Wall How To

Fence Board Planked Wall How To

Our latest update here at the cottage has been to add a planked wall treatment. With a Fox Hollow Cottage twist.

Our planked wall has a slightly different vibe then you get with the smooth boards or planks and very tight joints like the shiplap style lots of folks are using. It’s bit rougher, and has more of… “rustic, barn wood, farmhouse flavor”.

Since budget is always a factor and we try to keep our costs down, we went the least expensive route. After doing some material cost research that turned out to be 1 x 6 pre stained Douglas Fir fence boards.

Do I like the color? No. – Does it matter? No.

I knew it was getting painted, so I didn’t care one bit. Plus, it was super cheap.

The entire walls worth of wood cost us only $28.00 – WIN!

So if cheap and easy is your thing.. keep reading!

Fence Board Planked Wall How To

Using fence boards means less cutting and less measuring.. both of which will make your project go faster. We only had to make our length cuts. The boards were already the perfect width. So zip-zip and on you get to move on to the next step.

I meant to share this much sooner. I don’t know where my days fly away too? If you find them, send them back this way would you!?

Jim and I have been hard at work giving our combination powder bath and laundry room a makeover. You can see where we started here.

And get a little peek of our progress while I share our new planked wall!

*As with about every project we undertake here at the cottage, we had a problem. Our wall is solid concrete. Yay. So fun. So instead of being able to use a nail gun.. and a construction adhesive. We had to depend on an adhesive alone. It just makes it a bit more challenging. If you can install yours with nails. Lucky you!! This should be even easier!

SUPPLIES:

• 1 x 6 Fence Boards
• Saw (Chop Saw, Miter Saw, Table Saw or even a Radial Saw will work)
• Sanding Block
• Construction Adhesive (you’ll need what is beat suited to your particular walls)
• Spacers (we used quarters, they worked perfect)
• Paint and Paint Brush
• Trim

Optional: If you have electrical outlets, you’ll have to address those.

You’ll need new boxes or extension boxes to pull the outlet out and make it flush with the new wall. If you do not have electrical knowledge, please consult a professional.

TIP: Paint your wall before you install your boards. Whatever color you use can/may show though your spacing so you’ll want that uniform. I used white. I knew I would be using white paint to finish my wall so this made sense for us.

TIP: Start with a smooth, uniform wall. We had to do some repair to ours before we started to accomplish this. Again, old house. So much fun. (we’re used to it)

• Measure your wall and assess your material needs.
• Gather supplies.
• Plan out your pattern, this will dictate your cuts.
• Make your cuts.
• If you plan to paint and want a finished look… Paint it now, BEFORE you install it.

Knock Off Rough Edges with a Sanding Block

I gave ours a soft, slightly rounded finish.

• We installed our wall with a running bond pattern. That means your pattern runs 2 – 3 – 2. One row with two boards, the next with three, the next with two, repeat. Seams meeting up every other row.
• Use a level to ensure a straight line across your wall and start your first course working off that.
• Start applying your boards to the wall at the bottom. We began with a two board run for our first course.

• We placed our adhesive on the back of the boards in a long, wavy S pattern.
• Firm even pressure and a little wiggle as you push it onto the wall should do the trick.
• If you can, use a nail gun to further anchor your boards to the wall.
• Place your spacers.

• Install your next run, checking for level.
• Place spacers, install next board, repeat.
• When you reach the ceiling line. You are done with your wall!
• Trim to taste.

TIP: We knew our wall was not level (big surprise!) so we planned to end our last course, and cover it with our trim.

There was so much to do in this room that we simply painted this particular wall, and hung a giant mirror when we moved in. We were busy dealing with the window to nowhere. Crazy, CRAZY scabbed in wall.. an exposed hot water heater.. the floor.. oh, and the rest of the house too.

You can see why it didn’t make the top-ten back then!

Back to the wall at present. Sorry! Memory lane sidetracked me there for a second.

With the less than perfect finish of our boards, I was not shooting for a smooth, polished look. I let the finish of the wood set the tone and decided to do a white wash.

I used my paint at full strength and applied with a brush. I worked some into the seams, but did not go for full coverage. With the pre-stained finish I suggest a primer coat first to seal and prevent bleed through. Then paint to taste.

I applied three coats of my white wall color and called it good. I like the less than perfect look. It’s got a good feel to it. I debated leaving it natural, but this room has no windows, so it was a short-lived thought.

This is a weekend project.

We got it done in two days total work time. With Jimmy cutting and me sanding the boards, to the install, new outlet, me painting and popping some trim in. Not counting our special situation waiting for the adhesive to dry. If we had nailed in, I could have painted right away. Waiting was smart though, I sure didn’t want any boards falling off the wall! So far so good. It’s been up for weeks now and everything is staying put beautifully.

As always, thanks for stopping in to see what we are up to. We are so happy to say goodbye to that ugly wall we inherited. I hope this was a helpful post that might work for a room in your home as well!!

~Shannon

Before and After Project Gallery www.foxhollowcottage.com

Disclosure: Please note that I am not a professional contractor. This is what worked for us, in our home.

I am simply sharing our personal results.

The images and content of foxhollowcotttage.com are protected by copyright laws. Do not copy or distribute any content without permission. Do not edit or remove watermarks from any images.

If you want to share any content in part or in full you must receive permission from foxhollowcottage.com prior to doing so.

© 2011 Fox Hollow Cottage

Get Fox Hollow Cottage delivered fresh, it's free! All new projects, ideas, & events can be sent directly to your in-box! Sign-up today.

Original article and pictures take foxhollowcottage.com site